AWG harvests moisture from the atmosphere and converts it to pure, potable water — on-site, on demand, with no infrastructure required.
Atmospheric water generation harvests moisture from the air around you and converts it into pure, potable water — on-site, on demand, with no wells, pipes, or supply chains required.
Ambient air is drawn in through a MERV-13 pre-filter. Humidity as low as 40% RH is sufficient — viable across most climates.
Air passes over cooling coils using Origen's MCORR™ thermal-recycling technology, dropping below the dew point so moisture condenses.
Condensed water passes through sediment, carbon, UV, and reverse osmosis stages — removing particulates, bacteria, and contaminants.
A remineralization cartridge reintroduces essential minerals for optimal taste and pH — output meets or exceeds EPA drinking water standards.
Pure, mineral-balanced water stored on-site — ready on demand, scalable from 103 gallons per day to 10,000+ for large stations.
The WellSpring100 is Captiva Verde's flagship deployment unit, powered by Origen's MCORR™ technology. It's the system installed at the University of North Florida's Center for Utility Security and Resiliency — where researchers are validating efficiency and user experience in real-world conditions.
The WellSpring100 operates at approximately 0.25 kWh per litre — roughly 40% more efficient than comparable atmospheric water generators on the market.
Get a Quote for Your Site
Select your climate region and water demand to get a real-time estimate — output per unit, units needed, cost per gallon, and environmental impact.
Based on Origen WellSpring100 specs. Unit cost assumed ~$32,000 (confirm with Captiva Verde). Actual output varies with conditions. Request a formal site assessment →
Tell us about your project and we'll provide a custom water output estimate and system recommendation.